Surge Protector with RJ45 Protection- BS RJ45G 48 D(A)

The Surge Protector with RJ45 Protection BS RJ45G 48 D(A) (630026) is designed for installation at the LPz 0B–2 boundary or higher, or directly adjacent to protected equipment. It complies with IEC standards for CAT 6 and Class D structured cabling systems and provides surge protection for industrial Ethernet networks, including 10M, 100M, and 1Gbit. Fully compatible with IEEE 802.3af/at/bt, this device ensures reliable defense for PoE applications. Developed in accordance with IEC 61643-21, EN 61643-21, and GB/T 18802.21, it delivers robust and standards-compliant network surge protection.

Type

BS RJ45G 48 D(A)
Art.-No.

630026
Features

1. ldeally suited for retrofitting, protection of all lines.
2. Cat.6 in the channel(class D).
3. Power over Ethernet lEEE 802.3 compliant (up to PoE++ /4P PoE).
4. For installation in conformity with the lightning protection zone concept at the boundaries from 0B -2 and higher.
5. Good discharge capacity, low voltage protection level.
6. All 8 lines protected.
7. Protection of all pairs by powerful Gas Discharge Tubes.
8. Quick response, high transmission speed, low siqnal attenuation.
9. Fully shielded RJ45 socket, 35mm standard guide rail, easy to install.
10. 10/100/1000Mb(1G) Data Rate.
11. CAT5,CAT5e,CAT6,CAT6a Compatible.
12. 802.3af, 802.3at,802.3bt and Passive PoE Compatible.
13. PoE,PoE+ and PoE++ Compatible.

Inquiry

Download Datasheet

Support PoE++/4PPoE System

E10/E100/E1000 Mbps

Auminum Housing

RJ45 Connection

35mm DIN Rail, 1Port

A surge protector with RJ45 protection safeguards Ethernet lines from lightning and power surges, ensuring stable data transmission and reliable network performance. Ideal for routers, switches, IP cameras, VoIP phones, and other PoE-enabled devices, it prevents costly downtime and equipment damage, offering robust protection for both residential and commercial network systems.

Features

1. RJ45 Interface Protection: Specifically designed to protect Ethernet and PoE lines from surges and lightning strikes.
2. Gigabit Data Support: Ensures fast and stable data transmission without signal degradation.
3. IEEE 802.3 Compliance: Compatible with PoE, PoE+, and PoE++ standards for modern network devices.
4. Full-Mode Protection: Provides both common-mode and differential-mode surge suppression.
5. Compact and Durable Design: Built for easy installation in residential, commercial, and industrial environments.
6. Plug-and-Play Installation: No additional power source required—connect directly between network devices.
7. Wide Device Compatibility: Protects routers, switches, IP cameras, VoIP phones, and other Ethernet devices.
8. Standards-Compliant Safety: Designed according to IEC 61643 and EN surge protection standards for reliable performance.

Advantages

1. Protects Valuable Equipment: Prevents costly damage to routers, switches, IP cameras, and other Ethernet devices.
2. Ensures Network Reliability: Keeps data connections stable by blocking surge-induced downtime or packet loss.
3. Extends Device Lifespan: Reduces wear on connected network hardware, ensuring long-term performance.
4. Lowers Maintenance Costs: Minimizes repair and replacement expenses due to surge-related failures.
5. Provides Peace of Mind: Offers reliable protection for critical systems like VoIP phones, security cameras, and smart devices.
6. Easy Integration: Installs quickly without the need for additional power sources or complex wiring.

Applications

Installation

1. Select the Installation Point: Place the surge protector between the external Ethernet line and the protected device (e.g., router, switch, or IP camera).
2. Power Down Equipment: Turn off and disconnect all connected network devices before installation to ensure safety.
3. Connect the Incoming Ethernet Cable: Plug the external Ethernet line (coming from outside or a patch panel) into the input port of the surge protector.
4. Connect the Outgoing Ethernet Cable: Use another RJ45 cable to connect the output port of the surge protector to the device you want to protect.
5. Ground the Protector (if required): Ensure the grounding terminal is connected to a reliable earthing point for safe surge discharge.
6. Secure the Device: Mount the surge protector in a safe location, preferably close to the equipment it protects.
7. Power On and Test: Reconnect and turn on your network equipment, verifying that data transmission and PoE (if applicable) work normally.

Technical Data

Product Showcase

Start Your Project

We will respond to you within 24 hours after receiving your request email.

3 Years Warranty
Free Customized Design
Welcome OEM and ODM Service
CE RoHS CB KEMA TUV Certificates
Surge Protecetive Device（SPD）Factory
30+ Years Surge Protector SPD Experiences

Type	BS RJ45G 48 D(A)
Art.-No.	630026
Number of Ports	1 Port
Nominal voltage [UN]	48V
Rated voltage (max. continuous d.c. voltage) [Uc]	48V
Rated voltage (max. continuous a.c. voltage) [Uc]	34V
Max. continuous d.c. voltage (pair-pair POE) [Uc]	57V
Nominal current [IL]	1A
D1 Lightning impulse current (10/350μs)[Iimp]	0.5kA(line-PG)
C2 Nominal discharge current (8/20μs)[In]	1.25kA(line-line), 2.5kA(line-PG)
C2 Nominal discharge current (8/20μs) (POE) [I_n]	0.15kA(pair-pair)
C2 Total nominal discharge current (8/20μs) [In]	10kA
Voltage protection level at In C2 [Up]	≤ 700V(line-line) ≤ 700V(line-PG)
Voltage protection level at In C2(POE) [Up]	≤ 900V(line-line)
Insertion loss at 250MHz[a_E]	≤ 3dB
Capacitance [C]	≤ 10pF(line-line) ≤ 10pF(line-PG)
Trassmission frequency[f_G]	100MHz
Max. data transmission rates [Vs]	1000Mbits/s
Degree of protection	IP 20
Operating temperature range [Tu]	-40°C…+80°C
Connection input/output	RJ45 shield socket
Pinning	1/2, 3/6, 4/5, 7/8
Mounting on	35mm DIN rail, EN 60715
Enclosure material	Auminum
Earthing via	Earthing screw
Place of installation	Indoor
Shield earthing	Indirectly via integrated spark gap
Test standards	IEC 61643-21; EN 61643-21; GB 18802.21
Certification	CE(LVD,EMC), RoHS
Warranty	3 Years