Signal Surge Protector SPD: Protect Data Lines

Prodcuts Catalog

Signal Surge Protector SPD

The Signal Surge Protector SPD protects electrical surges within transmission signal systems to extend the operational lifetime of delicate equipment. These devices constitute essential safety elements that protect the operation of data communication systems as well as telecommunication lines and control and monitoring systems. The devices help maintain data integrity through power surge protection and enable continuous signal flow and save critical structures from surge-related damage.

Surge Guard -BS 3RK SCD 24-DI

BS 3RK SCD 24-DI 610533 1. For mounting on the 35mm DIN rail . 2. Small size, only 7mm wide module. 3. Connected to earth by DIN rail or earth terminal . 4. With shield terminal (direct or indirect to earth) .

Measuring & Controlling System Surge Protector

General Electric Surge Protectors -BS SCY 250/4M

BS SCY 250/4M 620389 1. For mounting on the 35mm DIN rail. 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level. 5. Minimum space requirements, four signal lines over a width 12mm (2/3 modules).

Measuring & Controlling System Surge Protector

Electrical Panel Surge Protector -BS SHFD 5/4M

BS SHFD 5/4M 620174 1. For mounting on the 35mm DIN rail. 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level. 5. Minimum space requirements, four signal lines over a width 12mm (2/3 modules).

Measuring & Controlling System Surge Protector

Electrical Surges in House -BS LDD 24/4M

BS LDD 24/4M 620154 1. For mounting on the 35mm DIN rail. 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level. 5. Minimum space requirements, four signal lines over a width 12mm (2/3 modules).

Measuring & Controlling System Surge Protector

Commercial Electric Surge Protector -BS RK 24 ST-II LT

BS RK 24 ST-II LT 610551 1. For mounting on the 35mm DIN rail. 2. Small size, only 7mm wide module. 3. Connected to earth by DIN rail or earth terminal. 4. With shield terminal (direct or indirect to earth). 5. Incorporated battery, with life detection function. 6. Pressing Test Button confirms with LEDs the degradation and life span of the surge protection circuits.

Measuring & Controlling System Surge Protector

Lightning Protection for Buildings -BS 4RK SCD 24

BS 4RK SCD 24 611028 1. For mounting on the 35mm DIN rail. 2. Small size, only 7mm wide module. 3. Connected to earth by DIN rail or earth terminal. 4. With direct shield to earthing terminal.

Measuring & Controlling System Surge Protector

Signal Surge Protector SPD

The surge protectors operate efficiently with high-energy surges and maintain signal quality to provide consistent performance. Surge protectors are vital elements in telecom lines and Ethernet networks and security systems because they protect infrastructure from surge damage while maintaining signal integrity.