Where to Buy SPD for Solar Panels? Telebahn is the Right Choice

What Does a Surge Protection Device (SPD) for Solar Panels Do? 

A surge protection device (SPD) is used in solar power systems to protect them from overvoltage transients. An SPD will protect your solar system setup, inverters, batteries, and other essential components from damage by overvoltage due to lightning strikes, power surges, or routine switching operations with the aid of voltage diversion. 

Types of SPDs for Solar Applications 

Choosing the right SPD for your system requires understanding the different types available. 

• Type 1 SPD:

Protection against the direct strike of lightning. Fitted on the service entrance of the building. 

• Type 2 SPD:

Protects from switching surges and indirect lightning strikes. They are usually inside distribution boards. 

• Type 1+2 SPD:

Merges features from both Type 1 and Type 2 SPDs, thus offering combined and advanced protection. 

Key Specifications to Consider 

The following are some of the technical specifications to be taken into account when choosing an SPD. 

• Voltage Rating (Uc): As a rule of thumb, the SPD does not surpass the system’s voltage. For Example, 600V DC or 1000V DC. 
• Maximum Discharge Current (Imax): This shows the maximum surge current the SPD is capable to withstand or endure. For instance, 40kA or 100kA. 
• Nominal Discharge Current (In): This is the repetitive current level that an SPD gasp without damage.
• Voltage Protection Level (Up): A SPD’s voltage protection level is defined by the amount of residual voltage it allows during a surge, with lower values enabling better protection.
• Mounting Type: The form of mounting used for the SPD, in this case, DIN rail SPDs, is mounted for simple installation.

Where to Purchase SPDs for Solar Panels?

• We have been established as the leading provider of surge-protected devices in solar protection.
• If you are looking for a reliable source for buying SPDs for solar panels, Telebahn becomes your one-stop shop, a partner you can trust.
• Over 32 years of experience have allowed us to surge in the global market. We take pride in stating that we are a preferred choice for practitioners and homeowners all across the world.

Why Choose Telebahn for Your Solar SPD Requirements?

Where to buy SPD for solar panels? Telebahn provides precision in the pointed manufacturing of high-standard SPD and proves sustained market experience.

1. Suffocated R&DC:

At Telebahn, the highly motivated r&d team meshes arms and seams unlock to advance the company’s kite-free turbines. This tactful approach has enabled tremendous growth for the company.

2. Skilled Engineers:

When putting together an off-grid or shred ad solar panel system

3. Adherence to Quality Standards:

Our DC Surge protectors undergo multiple quality control checks for reliability and long-lasting durability. We abide by international standards such as IEC 61643-11 and thermally test our products for discharge capacity and responsiveness, speed, and thermal stability.

Guides for Buying the Appropriate SPD for Solar Panels

Choosing the right SPD (surge protection device) is crucial when protecting your solar panel system from electric surges caused by lightning or grid fluctuations. With these tips, we intend to help you make the right selection.

1. Confirm Compatibility of the Voltage Rating

Make sure that the SPD you are buying is compatible with your solar panel system’s DC voltage, which is usually 600V, 1000V, or 1500V. If the set voltage ratings do not match, the protection offered will be inadequate.

2. Check Discharge Current Capacity 

Look for SPDs with the appropriate maximum discharge current (Imax). For solar panels, it is typically recommended to have at least 40kA capacity to mitigate strong surges. 

3. Verify Compliance with Standards 

Pick SPDs that have either IEC 61643-11 compliance or any other international safety standards associated with photovoltaic systems. Certified devices are known to be more reliable and perform better. 

4. Consider Environmental Conditions 

For solar installations on rooftops and outdoors, it is better to choose SPDs rated at IP65 or higher for dust and water protection. 

5. Go for DIN Rail Mounted Design 

DIN rail-mounted SPDs are the best since they are uncomplicated and secure in solar combiner boxes or in distribution panels. 

What are the Advantages of Purchasing SPD for Solar Panels? 

Buying a Surge Protection Device (SPD) for your solar panel system is a wise decision, but also a critical one. This holds true for residential, commercial, or off-grid setups, as having the right solar SPD enhances the performance, safety, and reliability of the system. 

1. Guarding Your Assets 

Solar panels and inverters are expensive. A DC SPD for solar panels prevents damage from lightning strikes, electrical surges, and grid fluctuations. Without it, one surge can destroy your system, leading to costly repairs or replacements.

2. Guarantees Operational Longevity of the System

Implementation of SPDs in photovoltaic systems mitigates the overstress of electrical components and peripherals by controlling the magnitude of voltage bursts. This helps in protecting the inverters, controllers, and also the panels to some extent, thereby enabling you to realize the full advantages of your solar assets.

3. Reduces Power Interruption

With the use of solar surge protection devices, your system suffers less from outages and interruptions of service. This is critical for off-grid systems or areas with an unreliable supply of power, as you receive uninterrupted solar energy.

4. Reduction of Risk

Without proper management, surges could cause overheating, fire, or worst-case scenario, explosion. The installation of SPDs Type 1 and Type 2 securely shields and provides sufficient lightning protection for the solar panels, which averts basic safety risks both at home and in the workplace.

5. Minimal Expenses Over Time

While SPDs may seem pricey at first, they protect the user from major losses and downtime. Reliable SPDs also minimize maintenance costs by protecting delicate solar energy systems’ sensitive components.

Conclusion

Where to buy SPD for solar panels? Choosing the appropriate solar SPD is critical for safeguarding your solar investment. From a Type 1 or Type 2 SPD for solar panels, 600V or 1000V DC SPDs, to a DIN rail surge protector, purchasing from a reputable supplier is essential. Surge protection device manufacturers like Telebahn are a force to be reckoned with. With robust solar surge protection devices designed for residential and commercial use, we undergo unrivaled quality control and research and development. Telebahn is a trusted residential solar surge protection device supplier.